Name: 10.5m2 Jib
Brand: North Sails
SKU: Constant Camber 26
Price: 995 EUR
Availability: InStock

Question 1

What are the dimensions and sail area of this jib?

Accepted Answer

This jib has a sail area of 10.5 square meters. Its key dimensions are:

Luff: 8.57 meters (28.1 feet)
Foot: 2.63 meters (8.6 feet)
Leech: 8.12 meters (26.6 feet)

Question 2

What material is this jib made from, and what are its characteristics?

Accepted Answer

This jib is constructed from Norlam Xi06, a high-performance laminate sailcloth produced by North Sails. Norlam laminates are known for being lightweight and low-stretch, utilizing Mylar with various taffetas for durability. The &#8216;Xi06&#8217; likely indicates a specific variant within the Norlam range, offering a balance of strength, shape-holding, and ease of handling. North Sails is recognized for developing advanced sailmaking materials that ensure performance and longevity.

Question 3

What are "soft hanks" and what benefits do they offer?

Accepted Answer

Soft hanks are lightweight, flexible connectors typically made from high-strength fibers like Dyneema, used to attach the luff of the sail to the forestay. They offer several advantages over traditional metal hanks:

Lightweight: Significantly lighter than stainless steel equivalents, contributing to improved agility.
Safer: Less likely to cause damage to the mast, rigging, deck, or crew upon impact.
Corrosion-resistant: They do not corrode, ensuring longevity.
Easy to use: Quick, simple, and reliable connections that are easy to remove and do not bind, even under heavy loads.

Question 4

What is the purpose of the telltale window and trim stripes on this jib?

Accepted Answer

Both the telltale window and trim stripes are essential tools for optimizing sail trim and performance:

Telltale Window: This is a transparent section in the sail designed to make the telltales (small ribbons or yarn attached to the sail) clearly visible. Telltales help sailors observe the airflow over the sail, indicating whether adjustments are needed to achieve optimal trim and efficiency.
Trim Stripes: Also known as draft stripes or speed stripes, these horizontal lines on the sail help sailors visualize the sail&#8217;s shape and the position of its maximum draft (belly). They enable precise adjustments to sail trim, allowing you to optimize lift and speed by understanding how airflow affects the sail&#8217;s curvature.

Question 5

What type of boat is this jib suitable for?

Accepted Answer

This jib was originally specified for a 26-foot sailboat. Given its 10.5m2 sail area and Norlam Xi06 construction, it is well-suited for cruising or club racing on boats in the 25 to 40-foot range, where its lightweight and low-stretch properties can enhance performance.

Question 6

What is the condition of this jib?

Accepted Answer

This jib is in new condition. It has not been used and comes with its original bag.

Question 7

How should I care for and maintain this jib?

Accepted Answer

Proper care will extend the life of your jib. We recommend the following:

Rinse: After use, especially in saltwater, rinse the sail thoroughly with fresh water.
Dry: Always ensure the sail is completely dry before folding and storing to prevent mildew and color bleeding.
Store: Store the dry sail in its bag in a well-ventilated area away from direct sunlight.
Clean: For cleaning, use a mild soap and a soft brush; avoid harsh chemicals.
Inspect: Regularly inspect the sail for any signs of chafe, tears, or damage, and address them promptly.
UV Protection: If the sail will be left hoisted and furled for extended periods, ensure it has adequate UV protection, or consider a protective cover.

10.5m2 Jib

Related products

16m2 Genoa with hanks

12.5m2 Dacron Genoa with hanks

9m2 Dacron Jib with hanks