Name: GENOA 48mq
Brand: Resail
SKU: RESAIL-74253
Price: 1000 EUR
Availability: InStock

Question 1

What is a Genoa sail and its primary use?

Accepted Answer

A Genoa is a large headsail that extends past the mast, overlapping the mainsail. It is designed to increase the sail area forward of the rig, providing additional power and improving performance, especially in light to moderate wind conditions. Genoas are commonly used on single-masted sloops and twin-masted boats like yawls and ketches to enhance speed and upwind performance.

Question 2

What are the key dimensions of this Genoa?

Accepted Answer

This Genoa has the following specifications:

Sail Area: 48 square meters
Luff (leading edge): 14.95 meters
Foot (bottom edge): 6.36 meters
Leech (trailing edge): 14.07 meters

Question 3

What does "Dacron Cross Cut" construction mean?

Accepted Answer

&#8220;Dacron Cross Cut&#8221; refers to a traditional sail construction technique where the sail panels are aligned parallel to each other and perpendicular to the sail&#8217;s leech. This method is widely used for cruising and recreational sails, prioritizing durability, consistent performance, and ease of production. Dacron, a type of polyester, is well-suited for cross-cut construction due to its low stretch and ability to hold shape effectively in various wind conditions.

Question 4

Why does this Genoa include a "White UV Cover Right Side"?

Accepted Answer

A UV cover, also known as a sacrificial strip, is crucial for protecting the sailcloth from the sun&#8217;s harmful ultraviolet (UV) rays. Prolonged UV exposure can weaken sail fibers, cause discoloration, and deteriorate stitching, significantly reducing the sail&#8217;s lifespan. The white UV cover on the right side acts as a protective layer, absorbing the UV radiation to preserve the integrity and performance of the sail, especially for furling genoas that remain hoisted.

Question 5

How can I determine if this Genoa is suitable for my sailboat?

Accepted Answer

To ensure this Genoa fits your sailboat, you should compare its Luff, Foot, and Leech measurements with your boat&#8217;s foretriangle dimensions. Key measurements for your boat, often referred to as I, P, J, and E, help determine the maximum sail sizes suitable. The luff length (I) and foot length (J) of your boat&#8217;s foretriangle are particularly important for a Genoa. Consulting your boat&#8217;s specifications or a sailmaker for precise measurements is recommended.

Question 6

How should I care for and maintain this Dacron Genoa?

Accepted Answer

Proper care extends the life of your Dacron Genoa. After use, rinse the sail thoroughly with fresh water to remove salt and dirt, then ensure it is completely dry before storage to prevent mildew. Avoid prolonged flogging of the sail, and use your leech line to control leech flutter, as these actions can weaken the sailcloth. When not in use, keep the sail covered with its UV cover or stored in a sail bag to protect it from UV damage. For deeper cleaning, a mild detergent or a diluted bleach solution (for Dacron only) can be used, followed by a thorough rinse. Rolling the sail for storage is preferable to folding to avoid damaging creases.

GENOA 48mq

Related products

27.5m2 J3 in Aramid/Carbon Black

30m2 J2 in Aramid/Carbon Black

Genoa with hanks luff 11,7m